NC Swing Beam Shearing Machine
We manufacture high-quality Hydraulic Swing Beam Shear Machines to ensure precise and efficient cutting of sheet metal and plates. With a strong focus on power, accuracy, and smooth operation, our machines deliver clean shear cuts and high productivity. Robust engineering and customizable configurations meet the demands of modern fabrication, manufacturing, and steel processing applications.
India’s Trusted Manufacturer of Shearing Machines
Industrial Hydraulic Swing Beam Shear for Modern Fabrication
A Hydraulic Swing Beam Shear is a heavy-duty cutting machine that uses a hydraulically driven swing-type beam to deliver controlled shearing force for cutting sheet metal and plate materials. The swing beam design ensures uniform cutting pressure across the blade length, resulting in clean, accurate cuts with minimal distortion. Ideal for light-duty to heavy-duty shearing applications in fabrication shops, metal processing units, and industrial workshops.
Speed
High-efficiency hydraulic system generates strong and consistent cutting force for smooth and precise shearing operations.
Precision
Optimized beam motion and precise control ensure uniform blade travel and accurate cutting results.
Durability
Heavy-duty construction and premium hydraulic components ensure long service life and dependable performance under continuous use.
Rigid Engineering. Stable Cutting Accuracy
Hydraulic Swing Beam Shear Machine Design & Components
Understand the structural design, build integrity, and working elements that enable the hydraulic swing beam shear to provide steady blade motion, accurate alignment, and reliable cutting performance for sheet metal operations.
FRAME CONSTRUCTION
Swing Beam Shearing Machine fabricated from IS-2062 graded rolled steel plates table and cutting beam are deeply reinforced and fines shearing machines after stress reliving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the shearing machine is never disturbed.
CYLINDER
The cylinder bodies are precisely made from forged steel material duly bored and fine honed for long sealing life. The piston rods are made From EN – 8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).
TABLE
Super strong table of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife.
HYDRAULIC SYSTEM
The compact Blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low Noise hydraulic system is placed on the rear side of shearing machine, on top between two side plates. Pressure relief value is provided to safe guard the system and shearing machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable of generating more than the required pressure in shearing machine. Pressure gauge for system pressure, backpressure and holding pressure are providing on top of oil tank for quick reference.
UPPER BEAM
Upper beam is also of solid steel plate, carrying the upper knife. Its minimum weight ensures lesser load on the roller. The upper beam moves in flat heat-treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.
ELECTRONIC CONTROL PANEL
The electric control panel is located on the left hand side of the shearing machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the international practices to help easily locate any fault and replace components conveniently.
HOLD-DOWN
Solid clamping by powerful hydraulic loaded hold-down is one of the reasons for accuracy in our shearing machine. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold-down pressure is easily adjustable for clamping soft material. Different thickness of the material can be cut without further adjustment with consistently accurate and burr free results.
ACCURATE GAUGING
The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheet being cut.
BLADE (Knife)
Knifes are manufactured strictly as per standard HCHCr/OHNS. Every step from designing metallurgical specification, heat-treatment grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.
Evaluate Details Before Finalizing
Technical Specifications of Hydraulic Swing Beam Shear Machine
| MODEL NO. | Cutting Thickness | Cutting Width | Cutting Angle | Material Intension kN*m | Backgauge Range | Number of Stroke | Number of Hold Down | Main Motor kW | Weight Kgs | Overall Dimension Length x Width x Height |
| RP-Cut S - 2504 | 4 | 2500 | 1°30′ | 450 | 20-500 | 10 | 12 | 5.5 | 3800 | 3040x1610x1620 |
| RP-Cut S - 3204 | 4 | 3200 | 1°30′ | 450 | 20-500 | 10 | 14 | 5.5 | 5000 | 3840x1610x1620 |
| RP-Cut S - 4004 | 4 | 4000 | 1°30′ | 450 | 20-750 | 8 | 16 | 5.5 | 6500 | 4600x1700x1700 |
| RP-Cut S - 6004 | 4 | 6000 | 1°30′ | 450 | 20-750 | 5 | 20 | 7.5 | 11000 | 6460x2100x3200 |
| RP-Cut S - 2506 | 6 | 2500 | 1°30′ | 450 | 20-500 | 10 | 12 | 7.5 | 5000 | 3040x1610x1620 |
| RP-Cut S - 3206 | 6 | 3200 | 1°30′ | 450 | 20-750 | 9 | 14 | 7.5 | 6000 | 3840x1610x1620 |
| RP-Cut S - 4006 | 6 | 4000 | 1°30′ | 450 | 20-750 | 8 | 16 | 7.5 | 8200 | 4620x1750x1700 |
| RP-Cut S - 5006 | 6 | 5000 | 1°30′ | 450 | 20-750 | 6 | 18 | 7.5 | 10500 | 5400x1800x1900 |
| RP-Cut S - 6006 | 6 | 6000 | 1°30′ | 450 | 20-750 | 5 | 20 | 11 | 16500 | 6480x2100x2300 |
| RP-Cut S - 2508 | 8 | 2500 | 1°30′ | 450 | 20-750 | 10 | 12 | 7.5 | 6000 | 3040x1700x1700 |
| RP-Cut S - 3208 | 8 | 3200 | 1°30′ | 450 | 20-750 | 8 | 14 | 7.5 | 7200 | 3860x1700x1700 |
| RP-Cut S - 4008 | 8 | 4000 | 1°30′ | 450 | 20-750 | 8 | 16 | 7.5 | 8800 | 4640x1700x1700 |
| RP-Cut S - 5008 | 8 | 5000 | 1°30′ | 450 | 20-750 | 8 | 18 | 7.5 | 11500 | 5400x2100x2000 |
| RP-Cut S - 6008 | 8 | 6000 | 1°30′ | 450 | 20-750 | 8 | 20 | 11 | 18000 | 6480x2100x2350 |
| RP-Cut S - 2510 | 10 | 2500 | 2° | 450 | 20-750 | 9 | 12 | 11 | 7300 | 3040x1700x1700 |
| RP-Cut S - 3210 | 10 | 3200 | 2° | 450 | 20-750 | 9 | 14 | 11 | 8000 | 3860x1700x1700 |
| RP-Cut S - 4010 | 10 | 4000 | 2° | 450 | 20-750 | 8 | 16 | 11 | 12050 | 4650x2100x2000 |
| RP-Cut S - 6010 | 10 | 6000 | 2° | 450 | 20-750 | 5 | 20 | 15 | 24000 | 6500x2100x2300 |
| RP-Cut S - 2512 | 12 | 2500 | 1°40′ | 450 | 20-750 | 9 | 12 | 18.5 | 9000 | 3140x2150x2000 |
| RP-Cut S - 3212 | 12 | 3200 | 1°40′ | 450 | 20-750 | 9 | 14 | 18.5 | 10800 | 3880x2150x2000 |
| RP-Cut S - 4012 | 12 | 4000 | 1°40′ | 450 | 20-750 | 8 | 16 | 18.5 | 13000 | 4680x2150x2000 |
| RP-Cut S - 5012 | 12 | 5000 | 2° | 450 | 20-750 | 6 | 18 | 18.5 | 16000 | 5900x2150x2000 |
| RP-Cut S - 6012 | 12 | 6000 | 2° | 450 | 20-1000 | 5 | 20 | 18.5 | 29500 | 6900x2600x2700 |
| RP-Cut S - 8012 | 12 | 8000 | 2° | 450 | 20-1000 | 5 | 24 | 18.5 | 46500 | 9000x3500x3500 |
| RP-Cut S - 2516 | 16 | 2500 | 2°30′ | 450 | 20-750 | 9 | 12 | 18.5 | 11000 | 3140x2150x2000 |
| RP-Cut S - 3216 | 16 | 3200 | 2°30′ | 450 | 20-750 | 8 | 14 | 18.5 | 13000 | 3880x2150x2000 |
| RP-Cut S - 4016 | 16 | 4000 | 2°30′ | 450 | 20-750 | 8 | 16 | 18.5 | 16300 | 4650x2150x2000 |
| RP-Cut S - 5016 | 16 | 5000 | 2°30′ | 450 | 20-1000 | 6 | 18 | 18.5 | 20000 | 5900x2600x2700 |
| RP-Cut S - 6016 | 16 | 6000 | 2°30′ | 450 | 20-1000 | 5 | 20 | 22 | 36000 | 6900x2700x2700 |
| RP-Cut S - 8016 | 16 | 8000 | 2°30′ | 450 | 20-1000 | 5 | 24 | 22 | 75000 | 9000x3500x3500 |
| RP-Cut S - 2520 | 20 | 2500 | 3° | 450 | 20-750 | 8 | 12 | 22 | 15800 | 3440x2300x2500 |
| RP-Cut S - 3220 | 20 | 3200 | 3° | 450 | 20-1000 | 8 | 14 | 22 | 18500 | 4150x2350x2700 |
| RP-Cut S - 4020 | 20 | 4000 | 3° | 450 | 20-1000 | 5 | 16 | 22 | 21500 | 4850x2600x2700 |
| RP-Cut S - 6020 | 20 | 6000 | 3° | 450 | 20-1000 | 4 | 20 | 22 | 47000 | 6700x3000x3000 |
| RP-Cut S - 2525 | 25 | 2500 | 3° | 450 | 20-1000 | 8 | 12 | 37 | 19000 | 3200x2700x2900 |
| RP-Cut S - 3225 | 25 | 3200 | 3° | 450 | 20-1000 | 5 | 14 | 37 | 23000 | 4200x2900x3200 |
| RP-Cut S - 2530 | 30 | 2500 | 3° | 450 | 20-1000 | 4 | 12 | 37 | 23500 | 3300x2900x3000 |
| RP-Cut S - 3230 | 30 | 3200 | 3°30′ | 450 | 20-1000 | 4 | 14 | 40 | 26000 | 4200x2900x3200 |
| RP-Cut S - 2540 | 40 | 2500 | 4° | 450 | 20-1000 | 3 | 12 | 75 | 38000 | 3200x3300x3000 |
| RP-Cut S - 3240 | 40 | 3200 | 4° | 450 | 20-1000 | 3 | 14 | 90 | 49000 | 4300x3300x3200 |
Higher Output. Consistent Cuts. Long Service Life.
Key Advantages of Hydraulic Swing Beam Shear
Our Hydraulic Swing Beam Shear machines are built with a strong frame and precision-controlled mechanism to deliver smooth cutting action, dependable accuracy, and stable performance for demanding sheet metal applications.
Uniform Shearing Force
The hydraulic swing beam delivers consistent force across the blade, resulting in accurate and burr-free cuts.
Ideal for Fabrication & Metal Processing
Suitable for cutting mild steel, stainless steel, aluminium, and other sheet metal varieties in fabrication shops and industrial plants.
Smooth Hydraulic Operation
The advanced hydraulic system provides controlled and stable shearing motion for reliable performance.
High Productivity
Efficient shearing action and quick cycle times enhance workflow and throughput in production environments.
Adjustable Cutting Gap
Adjustable blade clearance allows precise cutting of different material thicknesses with reduced distortion.
User-Friendly Controls
Simple and intuitive controls make machine operation efficient and reduce setup time.
Standard Features & Optional Upgrades
Configured to Match Your Production Requirements
Rajesh Hydraulic Swing Beam Shear Machines are developed precisely to meet the rigorous requirements of modern metal fabrication and industrial production processes. Built with a strong frame, efficient hydraulic system, and precision-engineered swing beam mechanism, these machines provide excellent stability, dependable force transmission, and smooth operation.
Each machine is thoughtfully designed to ensure steady performance, enhanced safety features, and long-lasting endurance — making it an ideal solution for workshops and manufacturing units focused on quality and productivity output.
Standard Equipment
- Multi Edge Blades for Cutting Aluminium, Carbon Steel & Stainless Steel
- Cutting Line Illumination and wire for shadow line cutting
- Stroke Counter
- Quick Cutting Length Adjustment
- Hydraulic and Electrical Overload Protection
- Squaring ARM and Front Support ARM
- Beed Infill Plates with Ball Transfers
- Delta Inverter with Ball Screw and Polished Rod with 0.01 mm
- AccuracyDelta Inverter with Ball Screw and Polished Rod with 0.01 mm Accuracy
- Back Gauge Adjustment According to Blade Gap
- Back Gauge Retraction Features
- Sub Program and Programming Loop
- Sequence Repeat Function Auto Cutting (Flying Cut)
Optional Equipment
- Delem DAC 310 CNC Controller
- ELG0 P40 Controller
- Pneumatic Sheet Supporing System
- Table Mounted Sheet Angle Cutting Guage
Quality Assurance Through
Our Certificates
Structured for Reliability in Sheet Metal Processing
Core Components of the Hydraulic Shear
ESTUN E200-S
- Program Memory up to 40 Program up to 25 Steps Per Program
- One Side Positioning Indication
- Retract Funcation
- Auto Reference Search
- Power Down Memorization mm/inch
- English Diagnoses Function
DELEM DAC310
- Servo control technology
- Bright LCD display, 128×64 pixels
- Back gauge, Gap or Angle control
- Stroke length limitation
- Actual and programmed position visualisation
ELGO P40
- Single or Two axis Controller
- LCD display
- Manual function
- Single set operation
- Program set operation
- Digital Output
- Analog Output
From Light-Duty to Heavy-Duty Applications
C-Frame Power Press Machines by Tonnage Capacity
rcp10
Learn More →
rcp10
Learn More →
rcp10
Learn More →
rcp10
Learn More →
rcp10
Learn More →
rcp10
Learn More →
Why Choose Rajesh Hydraulic Swing Beam Shear
Rajesh Hydraulic Swing Beam Shear machines deliver dependable cutting performance for sheet metal applications that require accuracy, stability, and repeatable results. The rigid frame construction maintains blade alignment and smooth swing motion, allowing clean shearing action and consistent edge quality across varying material thicknesses. This makes the machine suitable for fabrication shops as well as high-output production environments.
Each unit is manufactured using durable materials and carefully assembled components to provide structural strength, steady operation, and extended service life. The solid build minimizes vibration, supports cutting precision, and keeps servicing needs manageable even under continuous workload conditions.
Rajesh Machines (India) LLP Hydraulic Swing Beam Shears can be configured to match different production requirements with options for cutting capacity, control systems, safety mechanisms, and automation support. With dependable service assistance and access to original spare parts, these machines help maintain stable performance, operational safety, and long-term productivity.
Let’s Build Your Production Power
Get in Touch with Our Experts
People Also Ask
Frequently Asked Questions
A Hydraulic Swing Beam Shear is a metal cutting machine that uses a hydraulically powered swing beam mechanism to cut sheet metal. The upper blade swings in an arc to shear the material against the lower blade, providing smooth, precise cuts with reduced deformation. This design enhances blade life and overall machine durability.
Key features include a robust frame and hydraulic system, multi‑edge blades for cutting various metals (like aluminium, carbon and stainless steel), cutting‑line illumination, stroke counter, quick cutting length adjustment, overload protection, back gauge adjustment, and support arms for stable material handling.
Yes. Optional equipment includes advanced CNC controllers (such as DELEM or ELGO systems), pneumatic sheet support systems, and table‑mounted sheet angle cutting gauges to improve automation, precision, and material handling according to your specific production needs.
News
Our Recents Blogs
Rajesh Machines: Best Shearing Machine Manufacturer for Industrial Needs When you need precise metal cutting for your manufacturing projects, Rajesh
Introduction Considering buying a hydraulic rolling machine? You probably have just one question: ‘Should I get a 3-roll or 4-roll
Choosing a CNC press brake can be daunting, especially if you need to become more familiar with the different machines
Our clients say !
We provide a wide range of services tailored to meet the unique needs of
modern industries. From precision manufacturing and advanced
automation to custom product design and efficient logistics.
